AN ISO 9001 : 2015 COMPANY | AN INNOVATIVE PUMPING SOLUTION FOREVER
Working hours

Thur - Tues 09 AM - 08 PM

Call Us

+91 98989 39305

HDPE Pipes

HomeProductsHDPE Pipes

HDPE Pipes

SIGNOR PIPE CORPORATION (SPC) is a well-known manufacturer in the industrial, municipal, agricultural/irrigation, domestic pipe markets.

HDPE Pipes

Proper raw materials with specified grades (PE63, PE80 & PE100) are selected for production and these polyethylene are polymerized in controlled environment thus producing PE pipes of high quality products, superiority on nature. Polyethylene (PE 100) pipes can carry potable water, waste water, slurries, chemicals, hazardous wastes, & compressed gases. In fact PE-100 is strong, extremely tough and very durable when compared to it preceding materials like PE-80, & PE-63 Grade. PE-100 Pipe has superior qualities in terms of mechanical and also other properties when compared to PE-80 & PE-63. The polyethylene material used for the manufacture of pipeline systems are classified and dimensioned by long term performance under hydrostatic pressure in accordance with IS 4984:2016. The design basis used in IS 4984:2016 for Pressure rating (PN) of PE Pipes in order to determine the minimum wall thickness for each diameter and PN rating provides for the steady and continuous application of the maximum allowable working pressure over an arbitrary period of 50 years. The selection of the long term hydrostatic design stress values (HDS) is dependent on the specific grade of PE and the pipe material service temperature.

The inherent flexibility of the HDPE Pipes provides this product with its inherent minimum pipe stiffness of 320 kPa or 210 kPa. The smooth inner wall provides longitudinal stiffness which enables alignment and grade to be maintained in the trench during installation.

UV RESISTANCE

HDPE Pipe contains a minimum of 2% carbon black additives to protect the product from ultraviolet light. This gives HDPE Pipe maximum weather resistance in applications where continuos exposure to the elements is expected.

CHEMICAL RESISTANCE

HDPE has the highest level of chemical resistance of all traditional sewer products. HDPE pipe brings the gravity flow sewer market the same exceptional performance remaining tough and resistant under conditions that could seriously damage pipe made of other conventional materials.

RECOMMENDED PH RANGE

HDPE material provides excellent resistance to both acidic and alkaline environments with strong acids through all base, ranging PH 1.25 to 14.

ABRASION RESISTANCE

Tests indicate that HDPE Pipe is highly resistant to abrasion, giving it a significant advantage over other pipe materials in both acidic and abrasive environments. Piping made from polyethylene is a cost effective solution for a broad range of piping problems in municipal, industrial, marine, mining, landfill, duct and agricultural applications. it has been tested and proven effective for above ground, surface, buried, slip lined, floating and sub-surface marine applications.

DUCTILITY & TOUGHNESS

Polyethylene Pipe & fittings are inherently tough, resilient and resistant to damage caused by external loads, vibrations and from ressure surges such as water hammer. even in cold weather polyethylene pipe is tolerant to handling and bending.

ADVANTAGES BY USING HDPE PIPES

The design and construction of HDPE product offer a distinct weight advantage over conventional pipe. They Provide ease of handling, positioning, installing and connecting those conventional pipes cannot match. HDPE pipe affords these important ben-efits to the user.

SAVING ON INSTALLATION

Due to its light weight, less manpower and lighter machinery is needed to transport, handle & connect HDPE pipe compared to most of the other pipes. That’s real saving and real value added by using HDPE pipes.

IMPACT TOUGHNESS

PE pipe is highly resistant to the rigors of installation handling in tough environment prevailing at the site location. HDPE pipe can be installed with confidence in the hottest of summer or the coldest of winter conditions.

DIMENSIONS OF HDPE PIPES AS PER IS : 4984 : 1985
All Dimensions in Millimeters for use in Water Supply

HDPE Pipes
HDPE Pipes
HDPE Pipes
Material Classification

Proper raw materials with specified grades (PE63, PE80 & PE100) are selected for production and these polyethylene are polymerized in controlled environment thus producing PE pipes of high quality products, superiority on nature. Polyethylene (PE 100) pipes can carry potable water, waste water, slurries, chemicals, hazardous wastes, & compressed gases. In fact PE-100 is strong, extremely tough and very durable when compared to it preceding materials like PE-80, & PE-63 Grade. PE-100 Pipe has superior qualities in terms of mechanical and also other properties when compared to PE-80 & PE-63. The polyethylene material used for the manufacture of pipeline systems are classified and dimensioned by long term performance under hydrostatic pressure in accordance with IS 4984:2016. The design basis used in IS 4984:2016 for Pressure rating (PN) of PE Pipes in order to determine the minimum wall thickness for each diameter and PN rating provides for the steady and continuous application of the maximum allowable working pressure over an arbitrary period of 50 years. The selection of the long term hydrostatic design stress values (HDS) is dependent on the specific grade of PE and the pipe material service temperature.

Characteristics & Properties

The inherent flexibility of the HDPE Pipes provides this product with its inherent minimum pipe stiffness of 320 kPa or 210 kPa. The smooth inner wall provides longitudinal stiffness which enables alignment and grade to be maintained in the trench during installation.

UV RESISTANCE

HDPE Pipe contains a minimum of 2% carbon black additives to protect the product from ultraviolet light. This gives HDPE Pipe maximum weather resistance in applications where continuos exposure to the elements is expected.

CHEMICAL RESISTANCE

HDPE has the highest level of chemical resistance of all traditional sewer products. HDPE pipe brings the gravity flow sewer market the same exceptional performance remaining tough and resistant under conditions that could seriously damage pipe made of other conventional materials.

RECOMMENDED PH RANGE

HDPE material provides excellent resistance to both acidic and alkaline environments with strong acids through all base, ranging PH 1.25 to 14.

ABRASION RESISTANCE

Tests indicate that HDPE Pipe is highly resistant to abrasion, giving it a significant advantage over other pipe materials in both acidic and abrasive environments. Piping made from polyethylene is a cost effective solution for a broad range of piping problems in municipal, industrial, marine, mining, landfill, duct and agricultural applications. it has been tested and proven effective for above ground, surface, buried, slip lined, floating and sub-surface marine applications.

DUCTILITY & TOUGHNESS

Polyethylene Pipe & fittings are inherently tough, resilient and resistant to damage caused by external loads, vibrations and from ressure surges such as water hammer. even in cold weather polyethylene pipe is tolerant to handling and bending.

ADVANTAGES BY USING HDPE PIPES

The design and construction of HDPE product offer a distinct weight advantage over conventional pipe. They Provide ease of handling, positioning, installing and connecting those conventional pipes cannot match. HDPE pipe affords these important ben-efits to the user.

SAVING ON INSTALLATION

Due to its light weight, less manpower and lighter machinery is needed to transport, handle & connect HDPE pipe compared to most of the other pipes. That’s real saving and real value added by using HDPE pipes.

IMPACT TOUGHNESS

PE pipe is highly resistant to the rigors of installation handling in tough environment prevailing at the site location. HDPE pipe can be installed with confidence in the hottest of summer or the coldest of winter conditions.

Technical Specification

DIMENSIONS OF HDPE PIPES AS PER IS : 4984 : 1985
All Dimensions in Millimeters for use in Water Supply

HDPE Pipes
HDPE Pipes
HDPE Pipes

Sign Up For Newsletters

Don’t miss SIGNOR PIPE CORPORATION (SPC) latest news and events.
Signet Footer

Phenomenon always happens in invention when God Sprinkle its precious blessing on someone, SIGNOR PIPE CORPORATION (SPC) is one of them. SPC is major Rajkot (Gujarat) India based leading manufacturer of PIPES (Column Pipes, HDPE Pipes, Plumbing Pipes, Sprinkler Pipes, Suction Hose Pipe, Garden Pipes & Drip Pipes), CABLES ( Submersible Cables, Industrial Cable & House Wire Cable) & ADAPTORS (C.I., M.S. AND S.S.).

Helpline
+91 98989 39305
Call us on our helpline number.
Make_In_India
swachh-bharat
Contact Us
Office Address

101, Konark A Apartment, Chandan Park Main Road, Nr. Raiya Circle, 150 Feet Ring Road, Rajkot. (Guj.) INDIA

Factory Address

Plot no 140/141, Survey no 129, S.I.D.C. shantidham, Veraval(Sapar), Dist Rajkot. (Guj) INDIA

Copyright ©2020 SIGNOR PIPE CORPORATION (SPC). All rights reserved. Developed by IndiaFinds

Total Website Visits: 92556

WhatsApp Now
Call Now
error: Content is protected !!